OPT FOR SECURITY AND PERFORMANCE
Improve the security and performance of your plant with alarm management, performance supervision, asset supervision, web-based data visualisation, optimisation, advanced control, and tuning with the new TaiJi tool.
Rethink your working methods and obtain immediate results thanks to our services, trainings, and consulting expertise. Manage changes intelligently with our proven solutions.
certified service providerAugust 2005
In this issue
 |
Classes and seminars |
|
About us |
|
Trick for this month |
|
To contact us |
See our previous issues :
http://www.topcontrol.com/techinfo/news.php
|
|
Classes & seminars
Michel Ruel from Top Control will present in Amsterdam the class:
August 22-24,
ME-200-3 - Analytical methods for troubleshooting and Control loop tuning
Dr Hank Brittain from Top Control will present in Bangkok the seminar:
August 30 - Sept. 2, 2005,
SE-100-3, Modern Methods in Process Control
at the Petroleum and Petrochemical Engineering College, Chulalongkorn University, Bangkok, Thailand
| EX-501-3 - Detailed Loop Analysis with Expertune | |
| September 20-22, 2005 | Milwaukee, WI |
| October 18-20, 2005 | Clearlake, TX (with Carlos Smith) |
| ME-200-3 - Analytical methods for troubleshooting and Control loop tuning | |
| August 22-24, 2005 | Amsterdam, Netherlands |
| October 18-20, 2005 | Kingston, ON |
| SE-100-3 - Seminar on modern control methods | |
| August 31 - September,2, 2005 | Bangkok, Thailand |
|
|
See our 2005 calendar, Classes & Seminars (many classes and seminars have been added for next Fall :
See at : http://www.topcontrol.com/training/tcalendar.php
An article wrote by Michel Ruel is published in ISA Management Division Newsletter.
PERFORMANCE AND OPTIMIZATION -- AN ECONOMIC POINT OF VIEW
See http://www.isa.org/%7Eman/jul05/jul_05_mr_performance_optimization.pdf
|
|
Trick for this month : Remote tuning
We recently started to optimize via Internet. A secure connection is used to link computers from different sites.
For
example, PIDTuner or PlantTriage (by ExperTune) software installed in
your plant is used by Top Control engineer from our office. This
approach is very efficient - almost as much as if it was done on site.
Data
can also be exchanged via Email. Top Control engineer sends a series of
tests to be done by plant personnel. He then analyzes the data and
sends suggested modifications and supplementary tests to validate the
solution.
However, we observe that this
approach is more efficient if Top Control engineer met plant personnel
during a previous visit. This face to face contact ensures better
communication and understanding.
|
|
Comments, suggestions and requests are welcomed. Please e-mail us at: info@topcontrol.com
You are welcomed to visit our web site :http://www.topcontrol.com
|
49 Bel-Air Street, Lévis, QC
|
|
1020 James Drive, Suite A
|
